Powerlux Industries Private Limited

Engine: Direct injection, water cooled , 6 cylinder, Vee, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Electronic governor
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooling, with turbocharged after cooling
• Plate type lube oil cooler
• Filter –fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill of lube oil and coolant

Alternator: 

• Crompton Greaves (optional-Stamford/equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic enclosure: 

• Engine - alternator assembly mounted on AV mounts with silencer and S.S exhaust bellow suitably optimized to meet Stringent noise emission standards as laid down by MOEF/CPCB
• Base rail with draw-out type fuel tank provided with drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 11 hours capacity at 75% load
• 24 V dry batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour
• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.

Control panel: 

• RAL 9003 White Powder coated control panel
• manufactured with CRCA sheet provided with
• MCCB of suitable rating with short circuit protection
• Controller with voltage, current, KW, PF, Frequency, KWh display
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Aluminum busbars of suitable capacity with incoming and outgoing terminations
• Control fuses duly wired and ferruled

Power cables: 

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guidelines
• Foundation Drawing
• Parts manual

Fuel Consumption - LPH @ % Load

• 100% 58.2
• 75% 42.3

Alternator Specifications:

• Current @ 0.8 PF (Amps) 347.5
• Voltage (V)380 - 440
• Type 4P, rotating field
• Leads: Qty/Type 6 fixed Optional 12 reconnectable
• Bearing: Qty/Type 1, sealed
• Voltage regulation: No load to full load 2P sensing, ±1%
• One step load acceptance 100% of rating
• Unbalanced load capability 25% of rated current

Product Details:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program 

Some of our customer Industries: 

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Engine with direct injection, Water cooled engine, Single cylinder, 4 stroke, rated at 3000RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor
• Water Cooled
• Filters - fuel, lube oil
• Dry type replaceable paper element air cleaner
• Suitable for single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil

Alternator:

• NSM//Crompton/Equivalent, brushless alternator
• Self-excited, AVR/Capacitor-regulated
• Class ‘H’ insulation
• Salient pole revolving field
• Single bearing

Control panel: 

• Powder coated control panel manufactured with CRCA sheet

Control panel having following features:

• MCB of suitable rating with short circuit protection
• Start arrangement - Push Button on Controller
• Copper conductor cables between Alternator & Control panel.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Standard Warranty:

• 1.5 years (2000 hrs.) from the date of commissioning or 2 year from the date of invoice Whichever Occurs First.

Fuel Consumption: 

• @ 100 % load 2.6
• @ 75 % load 2.3
• @ 50 % load 1.8
• @ 25 % load 1.4

Alternator Specification:

• Type 2 Pole , Rotating field
• Bearing: Quantity , type 1,Sealed
• Coupling: SAE5/6.5, close coupled
• Voltage regulation: No load to full load +5%, -10%
• One step load acceptance: 100% of rating

20 kVA:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of Our Customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Alternator Specifications:

• Voltage Range: 380-440V
• Current @ 0.8PF (Amps) 86.9/27.8
• Type 4 Pole , Rotating field
• Leads: Quantity , type 6, fixed 12, re connectable (Optional)
• Voltage Regulator: Solid State
• Bearing: Quantity , type 1,Sealed
• Coupling Flexible disc, Close coupled
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

Fuel Consumption - LPH at % load:

• 100% 5.0
• 75% 3.8
• 50% 2.8
• 25% 1.6

Engine with direct injection, water-cooled engine, 3 cylinder, in-line, 4 stroke,rated at 1500RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, Low Temperature After cooling (LTA)
• Filters - fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolan

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air Vent inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 17 hour’s capacity at 75% Load
• Dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control panel: 

• RAL 9003 white Powder coated control panel manufactured with CRCA sheet, 

Control Panel Having Following Features:

• MCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper cables of suitable capacity with incoming and Outgoing terminations
• Control fuses duly wired and ferruled

Power cables: 

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Fuel Consumption - LPH at % load:

• 100% 6.3
• 75% 5.0
• 50% 4.1
• 25% 2.6

Alternator Specifications:

• Current @ 0.8PF (Amps) 108.6/34.7
• Type 4 Pole , Rotating field
• Leads: Quantity , type 6, fixed 12, re connectable (Optional)
• Bearing: Quantity , type 1,Sealed
• Coupling Flexible disc, Close coupled
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

Engine with direct injection, water cooled engine, 4 cylinder, in-line, 4 stroke, rated at 1500RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhausts manifold, stainless steel exhaust flexible connection
• Radiator Cooled, with turbocharged after cooled.
• Filters - fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator:

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Alternator
• Self-excited, self-regulated
• Class ‘H’ insulation
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic enclosure:

• Engine alternator assembly mounted on AVM with
• Silencer and S.S exhaust bellow suitably optimized to meet stringent sound & emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air Vent, inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 13 hours capacity at 75% load.
• Dry, batteries with connecting leads and terminals

Control panel:

• Powder coated control panel manufactured with 

CRCA sheet, Control Panel is having following features:

• MCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper Cables of suitable capacity with incoming and
• Outgoing terminations
• Control fuses duly wired and ferruled

Power cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Alternator Specification:

• Type: 4 Pole, Rotating field
• Exciter Type: Brushless
• Leads: Quantity , type 6, fixed. 12, re connectable (Optional)
• Voltage regulator: Solid State
• Insulation: Class H
• Temperature Rise: 125 Deg. C
• Bearing: Quantity , type 1,Sealed
• Coupling Flexible disc, close coupled
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

Fuel Consumption - LPH at % load:

• 100%: 9.1
• 75%: 7.1
• 50%: 5.3
• 25%: 3.5

45 kVA:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

 

Some of our customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Engine with direct injection, water-cooled engine, 3 cylinder, in-line, 4 stroke,rated at 1500RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, with after cooled
• Plate type lube oil cooler 
• Filters- Fuel, Lube oil
• Dry type replaceable paper element air cleaner 
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator 
• First fill lube oil and coolant 

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air Vent inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 17 hour’s capacity at 75% Load
• Dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control panel: 

• RAL 9003 white Powder coated control panel manufactured with CRCA sheet, 

Control Panel Having Following Features:

• MCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for Load On and Set Running
• Current transformers of suitable ratings
• Copper cables of suitable capacity with incoming and Outgoing terminations
• Control fuses duly wired and ferruled

Power cables: 

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Fuel Consumption LPH at % load:

• 100% 11.1
• 75% 8.6
• 50% 6.3
• 25% 3.8

Alternator Specifications:

• Current@0.8PF(Amps) 62.6
• Type 4 Pole, Rotating field
• Leads: Quantity, type 6, fixed 12, re connectable (Optional)
• Bearing: Quantity, type 1,Sealed
• Coupling Flexible disc, Close coupled
• Voltage regulation: No load to full load 2 Phase sensing ±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

50 kVA:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of Our Customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Engine with direct injection, water cooled engine, 3 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor /Electronic Governor (Optional)
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, turbo charged after cooled
• Plate type, lube oil, cooler
• Filters-fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator:

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent) brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound & emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 14 hours capacity at 75% load.
• 12V dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour.

Fuel Consumption - LPH at % Load:

• 100% 12.35
• 75% 9.97
• 50% 7.2
• 25% 4.7

Engine with direct injection, water cooled engine, 3 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor /Electronic Governor (Optional)
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, turbo charged after cooled
• Plate type, lube oil, cooler
• Filters-fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound emission
• Standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 13 hours capacity at 75% load.
• Dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control panel:

• RAL 9003 White Powder coated control panel manufactured with
• CRCA sheet , Control Panel is having following features:
• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.
• MCCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper Cables of suitable capacity with incoming and
• Outgoing terminations
• Control fuses duly wired and ferruled

Power cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy.

Literature:

• Operation Manual General maintenance & installation Guideline Foundation Drawing Parts manual

Fuel consumption - LPH at % load:

• 100% 14.1
• 75% 10.5
• 50% 8.7
• 25% 4.9

75 kVA Generator:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program
• Some of our customer Industries - Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS & D, Railways, Defense, Retail, & Government etc.

Engine with direct injection, water cooled engine,3 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, with turbocharged after cooled
• Plate Type lube oil cooler
• Filters-fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator

Alternator:

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Control Panel:

• RAL 9003 White Powder coated control panel manufactured with CRCA sheet 

Control Panel is having following features:

• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.
• MCCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper cable of suitable capacity with incoming and
• Outgoing terminations
• Control fuses duly wired and ferruled

Power Cables: 

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Fuel consumption - LPH at % load:

• 100%: 17.57
• 75%: 12.63
• 50%: 9.8
• 25%: 5.5

Lubricating Oil system:

• Lube oil sump capacity: 8.5
• Oil consumption ( % of SEC) 0.2
• Oil filter quantity (Nos) /type 01 / spin on type

Cooling System:

• Cooling system is designed for max ambient temp, Deg. C at rated load: 50
• Water pump type: Centrifugal, Gear Driven

Alternator Specification:

• Current @ 0.8PF (Amps): 104.3
• Type 4 Pole , Rotating field
• Exciter Type: Brushless (Permanent magnet optional)
• Leads: Quantity, type 6, fixed. 12, re connectable (Optional)
• Temperature rise 125 Deg. C (Class H)
• Bearing: Quantity , type 1,Sealed
• Coupling: Flexible disc, closed coupled
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance: 100% of rating
• Unbalance load capability: 25% of rated current

100 kVA:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Features:

• Compact and micro processor based fully configurable control unit
• 4 line LCD display
• Unique integrated DG set controller
• Incorporates both, engine and alternator parameters in a single console
• Fully configurable digital output
• All configurable parameters with password protection
• AMF ready
• Remote start

Display Parameters:

• Engine oil pressure 
• Coolant temperature
• Fuel level indicator (%)
• Battery voltage
• Engine rpm
• DG set running hours
• Generator volts - Phase to neutral & Phase to phase
• Generator current (amps)
• Power factor 

Audio Visual Warning:

• Low oil pressure
• High coolant temperature
• Low battery voltage
• Low fuel level

Shutdown with Audio Visual Annunciation:

• Low oil pressure
• High coolant temperature
• Engine overspeed
• Engine underspeed
• High canopy temperature
• Low fuel level
• Over voltage
• Under voltage
• Over frequency
• Under frequency 

Cooling System:

• Heater Kit for -20 Deg C Operation / Heater Kit for -30 Deg C

Electrical systems:

• Alternator Space Heater / Higher Rating Battery / Battery Charger / Battery Heater / Copper Bus Bar / Sealable kWh / Earth Fault Relay / Remote Annunciator / Remote monitoring / RTD/BTD Temperature Scanner

AMF & Synchronizing System:

• AMF panel / AMF with Autosynchronization (Deep Sea / Woodward)

Open unit (for export):

• Exhaust silencer-Hospital/Residential Grade, Stainless Steel, flexible pipe.

Fuel system:

• Flexible Fuel Lines / SS fuel lines / Fuel Pressure Gauge/fuel Flow Meter

Enclosed unit:

• Acoustic Enclosure – Super silent / External 990 L Fuel Tank

Miscellaneous:

• Air Cleaner (Heavy Duty)/Air Cleaner Restriction Indicator Digital / Closed crankcase ventilation

125 kVA:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of our customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Alternator Specifications:

• Voltage Range(V) 380 - 440
• Current @ 0.8 PF (Amps) 174
• Type 4P, rotating field
• Exciter type Brushless (PMG optional)
• Leads: Qty/Type 6 fixed Optional 12 reconnectable
• Bearing: Qty/Type 1, sealed
• Voltage regulation: No load to full load 2P sensing, ±1%
• One step load acceptance: 100% of rating
• Unbalanced load capability: 25% of rated current

Engine: 

• Direct injection, water cooled , 4 cylinder, inline, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following

Specifications:

• Mechanical FIP
• Electronic governor
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooling, with turbocharged after cooling
• Plate type lube oil cooler
• Filter fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor Electric, battery charging alternator
• First fill of lube oil and coolant

Alternator: 

• Crompton Greaves (optional-Stamford/equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine - alternator assembly mounted on AV
• Mounts with silencer and S.S exhaust bellow suitably optimized to meet
• Stringent noise emission standards as laid down by MOEF/CPCB
• Base rail with draw-out type fuel tank provided with drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 11 hours capacity at 75% load
• 24 V dry batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour
• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.

Control Panel:

• RAL 9003 White Powder coated control panel manufactured with CRCA sheet provided with
• MCCB of suitable rating with short circuit protection
• Controller with voltage, current, KW, PF, Frequency, KWh display
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Aluminum busbars of suitable capacity with incoming and outgoing terminations
• Control fuses duly wired and ferruled

Power Cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guidelines
• Foundation Drawing
• Parts manual

Details:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of our customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Alternator Specifications:

• Current @ 0.8 PF (Amps) 250.2
• Type: 4P, rotating field
• Exciter type: Brushless (PMG optional)
• Leads: Qty/Type 6 fixed Optional 12 reconnectable
• Bearing: Qty/Type: 1, sealed
• Voltage regulation: No load to full load 2P sensing, ±1%
• One step load acceptance: 100% of rating
• Unbalanced load capability: 25% of rated current

Engine: 

• Direct injection, water cooled , 6 cylinder, inline, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following

Specifications:

• Mechanical FIP
• Electronic governor
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooling, with turbocharged after cooling
• Plate type lube oil cooler
• Filter –fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill of lube oil and coolant

Engine with direct injection, water cooled engine, 6 cylinder, in-line, 4 stroke,rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the followingspecifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator cooled with turbocharged after cooled
• Plate type lube oil cooler
• Filter –fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic enclosure: 

• Engine alternator assembly mounted on AVM with
• Silencer and S.S exhaust bellow suitably optimized to meet stringent sound & emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air
• Vent inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 10 hours capacity
• 12 V dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour.

Control panel: RAL 9003 White Powder coated control panel manufacturedwith CRCA sheet , Control Panel is having following features:

• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.
• MCCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Aluminum busbars of suitable capacity with incoming and Outgoing terminations
• Control fuses duly wired and ferruled

Power cables: 

• Uninyvin copper conductor cables between Alternator & Control
• panel inside the canopy.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Fuel consumption - LPH at % load:

• 100% 45.1
• 75% 33.6
• 50% 23.8
• 25% 12.6

Details:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of our customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Engine Direct injection, water cooled , 4 cylinder, inline, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Electronic governor
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooling, with turbocharged after cooling
• Plate type lube oil cooler
• Filter fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor Electric, battery charging alternator
• First fill of lube oil and coolant

Alternator: 

• Crompton Greaves (optional-Stamford/equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure: 

• Engine - alternator assembly mounted on AV mounts with silencer and S.S exhaust bellow suitably optimized to meet stringent noise emission standards as laid down by MOEF/CPCB
• Base rail with draw-out type fuel tank provided with drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 11 hours capacity at 75% load
• 24 V dry batteries with connecting leads and terminals 90% gloss RAL9003 white pure polyester powder coated, base in black colour
• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness

Control Panel: 

• RAL 9003 White Powder coated control panel manufactured with CRCA sheet provided with
• MCCB of suitable rating with short circuit protection
• Controller with voltage, current, KW, PF, Frequency, KWh display
• Indicating lamps for Load On and Set Running
• Current transformers of suitable ratings
• Aluminum busbars of suitable capacity with incoming and outgoing terminations
• Control fuses duly wired and ferruled

Power cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guidelines
• Foundation Drawing
• Parts manual

Fuel Consumption - LPH @ % Load:

• 100%: 3
• 75%: 2.3

Alternator Specifications:

• Current @ 0.8 PF (Amps): 14
• One step load acceptance: 100% of rating
• Unbalanced load capability: 25% of rated current
• Voltage regulation: No load to full load: 2P sensing, ±1%
• Bearing: Qty/Type: 1, sealed
• Leads: Qty/Type: 6 fixed Optional 12 reconnectable
• Type 4P, rotating field
• Voltage (V) 380 - 440

Details:

• Single Window Sales & Service through 3S Composite Dealers.
• Factory Built Genset with single level of Quality. (For India & Export)
• Full Compliance to ISO 8528 standards & CPCB-II Guidelines of emission & noise
• Best TCO (Total Cost Of Ownership) Hence economical in initial & running cost
• Superior aesthetics enclosures designed to meet 50 degree ambient
• Five years extended warranty program

Some of our customer Industries:

• Manufacturing, Process, IT/ITeS, Clinics, Hospitality,
• Education, BFSI, Banks, Real Estate - Residential & Commercial, Petrol Stations, Infrastructure,
• DGS&D, Railways, Defense, Retail, & Government etc.

Engine Direct injection, water cooled , 6 cylinder, inline, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Electronic governor
• Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooling, with turbocharged after cooling
• Plate type lube oil cooler
• Filter –fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill of lube oil and coolant

Alternator: 

• Crompton Greaves (optional-Stamford/equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine - alternator assembly mounted on AV mounts with silencer and S.S exhaust bellow suitably optimized to meet stringent noise emission standards as laid down by MOEF/CPCB
• Base rail with draw-out type fuel tank provided with drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 11 hours capacity at 75% load
• 24 V dry batteries with connecting leads and terminals 90% gloss RAL9003 white pure polyester powder coated, base in black colour
• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness

Control Panel: 

• RAL 9003 White Powder coated control panel manufactured with CRCA sheet provided with
• MCCB of suitable rating with short circuit protection
• Controller with voltage, current, KW, PF, Frequency, KWh display
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Aluminum busbars of suitable capacity with incoming and outgoing terminations
• Control fuses duly wired and ferruled

Power cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guidelines
• Foundation Drawing
• Parts manual

Engine with direct injection, water cooled engine, 3 cylinder, in-line, 4 stroke, rated at 1500RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, Low Temperature After cooling (LTA)
• Filters - fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivale)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise
• Salient pole revolving field
• Single bearing
• Automatic voltage regulato

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with
• Silencer and S.S exhaust bellow suitably optimized to meet stringent sound
• Emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air
• Vent inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 11 hours capacity at 75% load
• Dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control Panel RAL 9003 white Powder coated control panel manufactured with CRCA sheet, control Panel is having following Features:

• MCCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper Cable of suitable capacity with incoming and Outgoing terminations
• Control fuses duly wired and ferruled

Power Cables: 

• Uninyvin copper conductor cables between Alternator & Control
• panel inside the canopy

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Alternator Specification:

• Voltage Range: 380-440V
• Current @ 0.8PF (Amps) 130/41.7
• Type 4 Pole , Rotating field
• Leads: Quantity , Type 6, fixed. 12, re connectable (Optional)
• Bearing: Quantity , type 1,Sealed
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

Engine with direct injection, water-cooled engine, 2 cylinder, in-line, 4 stroke,rated at 1500RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled
• Filters - fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator: 

• Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent)
• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound emission standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air Vent inlet and outlet connections, level indicator, manhole etc
• Sub-base fuel tank with 17 hour’s capacity at 75% Load
• Dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control panel: 

• RAL 9003 white Powder coated control panel manufactured with CRCA sheet, 

Control Panel Having Following Features:

• MCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper cables of suitable capacity with incoming and Outgoing terminations
• Control fuses duly wired and ferruled

Power cables: 

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual

Fuel consumption - LPH at % load:

• 100% 3.5
• 75% 2.7
• 50% 2.0
• 25% 1.35

Alternator Specifications:

• Current @ 0.8PF (Amps) 65.2/20.8
• Type 4 Pole , Rotating field
• Leads: Quantity , type 6, fixed 12, re connectable (Optional)
• Voltage Regulator: Solid State
• Bearing: Quantity , type 1,Sealed
• Coupling Flexible disc, Close coupled
• Voltage regulation : No load to full load 2 Phase sensing,±1%
• One step load acceptance 100% of rating
• Unbalance load capability 25% of rated current

Engine with direct injection, water cooled engine,3 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:

• Mechanical FIP
• Mechanical governor / Electronic Governor (Optional)
• Turbocharger, exhaust manifold, stainless steel exhaust flexible connection
• Radiator Cooled, with turbocharged after cooled
• Plate Type lube oil cooler
• Filters-fuel, lube oil
• Dry type replaceable paper element air cleaner
• Flywheel housing and flywheel to suit single bearing alternator
• Starting motor – Electric, battery charging alternator
• First fill lube oil and coolant

Alternator Meccalte / (Optional -Stamford/ Crompton Greaves /equivalent):

• Brushless alternator
• Self-excited, self-regulated
• Class ‘H’ insulation limited to temperature rise of class H
• Salient pole revolving field
• Single bearing
• Automatic voltage regulator

Acoustic Enclosure:

• Engine alternator assembly mounted on AVM with Silencer and S.S exhaust bellow suitably optimized to meet stringent sound & emission
• Standards as laid down by MOEF / CPCB
• Base rail with draw-out type fuel tank is provided with a drain plug, air
• Vent, inlet and outlet connections, level indicator, manhole etc.
• Sub-base fuel tank with 11 hours capacity at 75% load.
• 12/24 V dry, batteries with connecting leads and terminals
• 90% gloss RAL9003 white pure polyester powder coated, base in black colour

Control panel: RAL 9003 White Powder coated control panel manufactured withCRCA sheet , control Panel is having following features:

• Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.
• MCCB of suitable rating with short circuit protection
• Controller which displays voltage, current, KW, PF, Frequency, KWh.
• Indicating lamps for “Load On” and “Set Running”
• Current transformers of suitable ratings
• Copper cable of suitable capacity with incoming and
• Outgoing terminations
• Control fuses duly wired and ferruled

Power cables:

• Uninyvin copper conductor cables between Alternator & Control panel inside the canopy.

Literature:

• Operation Manual
• General maintenance & installation Guideline
• Foundation Drawing
• Parts manual